Industrial Valves

We are an established manufacturer, stockiest, supplier & exporter of various industrial valves like needle valves, 2 way manifold valves, 3 way manifold valves, 5 way manifold valves and ball valves. All these are manufactured using superior grade ferrous & non-ferrous materials. These exhibit superior corrosion resistance, high functional life, easy maintenance and are passed through several quality ensuring tests to meet international quality & safety standards.

Features :
SS 316 construction for corrosion resistance, full or reduced bore for excellent flow. Flexible 3 piece design. Anti blow out internally loaded stem for safety. 90° smooth action operation pipe seats for ease of use and minimum maintenance.

Physical Features :
Pressure Rating 400 Kg/ CM2

Material Options :
SS 316, Carbon Steel, Aluminium, Bronze, Hastalloy Monel, etc. Optional KEL-F, Polyaman packing available with high pressure valves.

Standards : BS 5750

Tests :
Each Valve is tested with Nitrogen at 1000 PSI for Seat and Seal Leakage with a leakage rate of 0.1 Sec / Min.

Hydro Tests :
Performed with pure water at 1-1/2 Liters of the working pressure. Other tests like Helium, Sesmic are available upon request.

End Connections :
Variety of end connections ¼'' to 1'' NPT, BSP male or female threaded or ¼'', 3/8'', ½'' single or twin ferrule tube fitting ends.

2 Valve manifold pipe to flange design for separate mounting. Connecting system impulse lines and transmitters. Having simple two valve configuration which allows for easy block, bleed & calibration of a static pressure transmitter or gauge.

Features :

Testing :

Design Standard :

Note :
1. Dimensions are in mm. For reference only, subject to change.
2. Approximate weight : 0.95 KG. (2.1 LBS)

Features :
BSI 3 Valve manifold T- type pipe to flange connection design for connecting system impulse lines and transmitters. This manifold consists to ½'' NPT female connections on 54mm (2-18'') centers and of the equalizer valve and two block valves ¼'' NPT purge connections are optional.

Physical Features :

Testing :

5- Valve manifold T- type pipe to flange connection design for connecting system impulse lines and transmitters. This manifold consists to ½'' NPT female connections on 54mm (2-1/8'') centers and of two equalizer valve, Two block valves & onevent valve.

Features :

Note :
1) Dimensions are in mm. For reference only, subject to change.
2) Approximate weight : 2.45 KG

Material of Constructions

Features :
SS 316 construction for corrosion resistance, full or reduced bore for excellent flow. Flexible 3 piece design. Anti blow out internally loaded stem for safety. 90° smooth action operation pipe seats for ease of use and minimum maintenance.

Physical Features :
Pressure Rating 400 Kg/ CM2

Material Options :
SS 316, Carbon Steel, Aluminum, Bronze, Hastalloy Monel, etc. Optional KEL-F, Polyaman packing available with high pressure valves.

Standards :
BS 5750

Tests :
Each Valve is tested with Nitrogen at 1000 PSI for Seat and Seal Leakage with a leakage rate of 0.1 Sec / Min.

Hydro Tests :
Performed with pure water at 1-1/2 Liters of the working pressure. Other tests like Helium, Sesmic are available upon request.

End Connections :
Variety of end connections ¼'' to 1'' NPT, BSP male or female threaded or ¼'', 3/8'', ½'' Panam single or twin ferrule tube fitting ends.



Material of Construction :

Table of Dimensions :

Note : Dimensions are for reference only. Subject to change

BSI Syphons can be used to protect instruments from higher temperature & direct contact of live medium with instruments. These are manufactured in carbon Steel, Stainless Steel & Alloy Steel with butt weld or Threaded Ports.

Condensate POT / Seal POT is a section of pipe (4inch in diameter) installed horizontally at the orifice flange union to provide a large -area surge surface for movement of the impulse line fluid with instrument element position change. It is used to reduce measurement error for hydrostatic head difference in the impulse lines.